Free Download Renault Pin Code Reader Software

You should always ensure that the radio PIN CODE number is recorded by your Renault Dealership. If your pin code is unknown, you will need to contact the Service Department of an authorized Renault Dealer who can arrange to obtain the code. A fee may be charged for this service.

What is you have not record your pin code? obdtoolshop.co.uk here offer pin code software download for both old and new Renault vehicle models.

Renault PIN Codereading Key programmer works for Renault cars from 1999-2003 which is K Line. Renault Explorer works for Renault car after 2003 which is CAN line.

1)
Free Download Renault Pin CodeReading key programmer software

Software Language: English
Operating system: Windows XP O/S

Function:
Read immobilizer PIN code and Key programming on Renault Megane and Megane Scenic modules with UCBIC (BSI) module from 1999 to 2003 year via OBD II.

Support vehicle model:
Renault Megane & Scenic (1999-2003) 8 digits PIN code reading via OBDII
Renault Megane – 1999 to 2003
Renault Megane Scenic – 1999 to 2003

2)
Free Download Renault ExplorerV1.5 pin codereader software

Function:
Renault Explorer software allows you to add a blank key or card for many of Renault cars after 2003 via OBD2 socket. You can also change VIN number in UCH module (immobilizer). For example, if your UCH module was previously used on another car.

Computer system: Windows XP O/S

Supported models (Renault and Dacia):

Clio II Ph2/3, 2002-2006
Espace IV, 2003-2006
Espace IV Ph2, 2006+
Kangoo MUX Ph2, 2002-2007
Laguna II, 2000-2005
Laguna II Ph2, 2005-2007
Logan, 2004-2008 – New!!!
Logan Ph2, 2008+ – New!!!
Master Ph2, 2002-2006
Master Ph3, 2007+ – New!!!
Megane II, 2003-2006
Megane II Ph2, 2007+
Sandero, 2008+ – New!!!
Scenic II, 2003+
Scenic II Ph2, 2007+
Solenza, 2003-2005 – New!!!
Trafic II, 2002-2006
Trafic II Ph2, 2007+ – New!!!
Twingo Ph2, 2002-2007 – New!!!
Velsatis, 2002+
Velsatis Ph2, 2006+

This is from obd tool website technical support: Free Download Renault Pin Code Reader Software

Lexia 3 xs ecolution PP2000 Diagbox fails to communicate issue (SP08-C)

Lexia 3 XS Evolution Peugeot Planet PP2000 Diagbox item no SP08-C is the best quality lexia PSA diagnostic tool with original 921815C chip that works excellent on Peugeot 307. But recently one of SP08-C customers reported that his lexia interface cannot communicate with vehicle.

obdtool.co.uk engineers have worked out the solution. The solution fits all following 3 situations.

Occasion 1: Connect lexia3 cable with computer but there is no communication with the computer

Occasion 2: Change many vehicles but still cannot read ECU after plugged the lexia cable

Occasion 3: The device can be detected for 1 or 2 times at the beginning, but cannot be detected later.

Solution:

You have to change the lexia 3 PCB chip marked red below

Please contact obdtool.co.uk customer service and order the SP08-C lexia 3 chip to replace the old one.

This is from obd tool website technical support: Lexia 3 xs ecolution PP2000 Diagbox fails to communicate issue (SP08-C)

Question for the Lexia-3 V48 Citroen/Peugeot Diagnostic PP2000 V25 with Diagbox V7.57

10 Highlights to get Lexia 3 V48 pp2000 v25 diagbox v7.57: 

1. Software Version:
Lexia3  Software: V48
PP2000 Software: V25
Diagbox : V7.57
2. Language List: English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech
3. Update via CD.
4. Support cars from 1995 to 2012.
5. Support Windows XP.
6. PP2000/LEXIA-3 Interface works for both Citroen and Peugeot! Support Peugeot 307
7. Diagbox V7.49 Software free provide.
8. Lexia-3 PCB edge is golden with original full chips.Double PCB has 7pcs optocouplers, which are 100% original and new.
9. lexia-3 relays are 12pcs, which are 4.5V, it is more stable.
10. PP2000 have 2pcs Optocouplers.

Lexia 3 V48 FAQ:

Q1: when install Lexia-3 Diagbox software, error message reading “ERROR Lexia: error during installation of Lexia. You have to reactivate to restart the installation.”

A1: Your computer system isn’t compatible with the software; please use Windows XP operation system.

Q2: Does Lexia test the tire pressure?
A2: If your car has Tire pressure control unit, lexia-3 can test the tire pressure.

Q: After plug the USB cable to the Lexia 3 (item NO. SP08-C), the indicator lights flash and off, off and flash, not stable.
A: Is the USB cable also connected with the car? Check whether the USB cable is not connected well with the computer.
Q: yes, I do. I try on several cars, does not work either.
A: try to use another USB cable, if it will not work either, contact us, maybe it needs to return to us for check.

Q4: Does Lexia-3 work with Peugeot 308?
A4: Yes, it does, but which year of your Peugeot 308? Lexia-3 PP2000 works with Peugeot 308 from 1996 to 2008.

Q5: Can Lexia 3 (item NO: SP08-C) work with Peugeot Partner Tepee B9 2011 diesel car?
A5: this car model is included in the supported carlist, so far no users feedback this car is not supported.

Q6: is PPS compatible with Peugeot 307 HDI?
A6: PPS2000 work with Peugeot 307, but it is not compatible with Hybrid Diesel Peugeot only with the gasoline car.

Q7: Can Lexia-3 PP2000 (item NO. SP08-C) work with Peugeot 407 2005, after install the NEW DPF, can I reset DPF counter? After Eolys is full, can I reset Eolys counter?
A7: PP2000 supports Peugeot 407 2005, but the DPF and Eolys are truck or diesel car systems, we haven’t tested it.

Q8: Would you please store the software lexia3 and diagbox6.01 in one CD?
A8: No, they are not allowed to store in one CD, they have to be stored them in two different CD, otherwise the software installation will get errors.

Q9: During the installation of Lexia-3, I got ERROR reading “Failure of the activation (error 20).

A9: we are so sorry; we used to store the lexia3 pp2000 software and diagbox v6.01 software in the same one CD, now they are separately stored into two different CD. Or you can contact me for the software download link for you to use.

Q10: I install diagbox software on Windows XP3, 32BIT, but it can’t communicate with the car, besides, I install PPS software in another computer (Win XP, 32bit, SP3), I successfully active it, but can’t communicate with the car either, what’s the problem?
A10: Try to install Lexia-3 software, if lexia3 software can communicate with the car. So it suggests you didn’t install diagbox software properly, or your computer system is not compatible with diagbox software, please you watch the video in the CD, the video shows you how to step-by-step install the software.

Q11: It can do C5 cars?
A11: It is not stable for c5 cars, you'd better not choose this for c5.

Q12: It can be updated?
A12: It is updated by CD.

Q13: I have installed it on windows 7 system, but it cannot work, what is the problem?
A13: It can only be installed on XP system; you need to change another computer with XP system.

This is from obd tool website technical support: Question for the Lexia-3 V48 Citroen/Peugeot Diagnostic PP2000 V25 with Diagbox V7.57

PP2000 fix Engine Management Light (EML) on for Peugeot 206

This post starts with Peugeot 406 problem that Engine Management Light (EML) on, then use Lexia 3 PP2000 Peugeot diagnostic tool to read out the fault code, according to the fault code description, the technician finally solved the problem.

Let’s go

Car model and year:

Peugeot 206 Bella, a 1.4 16V Sport in Moonstone Blue

Car problem:

EML is coming on, showing anti-pollution fault, it'll stay there for about 3 days and then disappear for about a week, then back on for 3 days.

Tool to use:

I use PP2000 Peugeot diagnostic tool to read out codes, I bought from obdtoolshop.co.uk

http://www.eobdtool.co.uk/wholesale/best-quality-lexia-3citroen-peugeot-pp2000.html

Fault code and description

P0170 - Fuel Trim Bank 1

P0011 - A Camshaft Position - Timing Over-Advanced or System Performance Bank 1
P0012 - A Camshaft Position - Timing Over-Advanced or System Performance Bank 1

Advice:

I think you should remove the vvt solenoid, easy enough to do and just give it a good clean and tell us what the condition is like before you clean it

Solved:

It was a faulty Pre-cat Lambda.
Fuel Trim Bank 1 = Pre-cat Lambda sensor

This is from obd tool website technical support:   PP2000 fix Engine Management Light (EML) on for Peugeot 206

With diagbox V7.57 Series 921815C / Firmware Lexia 3 V48 PP2000 v25

To Lexia 3 PP2000 users,Obd tools website newly releases a new kind of best quality Lexia 3 PP2000 built-in original chip 921815C / firmware and can perform very well with Peugeot 307. The new lexia 3 pp2000 will demand those who want to get real picky and go for quality chips and check for NEC chips as in something like this:

http://www.eobdtool.co.uk/wholesale/best-quality-lexia-3citroen-peugeot-pp2000.html

obdtool.co.uk sells €75, and shipping cost depends on your destination.

This is newest Lexia-3 PP2000 package.

Two pieces of PCB board pictures with marked 921815C / firmware position to prove the best quality of Lexia 3 PP2000.

More detailed information on newest Lexia-3 PP2000

Firmware: 921815C /, best full chip

Software: V7 Date diagbox

Update: Once obdtool.co.uk is available with newest software download link, you will be informed to download.

Besides, the newest one package is different from the older version as follows.

http://www.eobdtool.co.uk/wholesale/pp2000-lexia-3-citroen-peugeot-diagnostic-tool.html

This is from obd tool website technical support: With diagbox V7.57 Series 921815C / Firmware Lexia 3 V48 PP2000 v25

Citroen Peugeot Lexia 3 PP2000 with 100% 921815C chip

Obd tools site (obdtool.co.uk) has extracted PSA Citroen and Peugeot Leixa 3 PP2000 XS Evolution Diagbox diagnostic interface with 100% original 921815C full chip that works perfectly on Peugeot 307, 407 and Citroen C5.

Software version: 

Lexia-3 V48,

Peugeot Planet 2000 PP2000 V25,

Diagbox 7.57

Software languages: 

English, Chinese, German, French, Japanese, Russian, Arabia, Spanish, Turkish, Danish, Iranian, Greek, Israel, Hungary, Indonesian, Italian, Dutch, Norwegian, Polish, Portuguese, Finnish, Slovenian, Swedish, Czech, Croatia, Thai...

PSA Lexia3 Interface firmware version and chip:

How to check if the LEXIA 3 is original?

Lexia-3 PCB edge is golden. Double PCB

Lexia-3 replays are 12pcs, which are 4.5V, it is more stable.

Lexia3 PCB has 7pcs optocouplers , which are 100% original and new

2pcs Optocouplers on Lexia 3 PP2000

Firmware: Reference Serial 921815 C/

This is from obd tool website technical support: Citroen Peugeot Lexia 3 PP2000 with 100% 921815C chip

Lexia 3 V48 xs Evolution Citroen/Peugeot Diagnostic to fix C4 Coupe clunking, squeaking and shaking, is it possible?

Car model tried: 

New (used) Citroen C4 coupe 1.6 petrol 2005, car is driven about 193000km.

Car Problem: Have a lot of noises makes starting to be very disturbing.

Detailed problem explanation:

1. When the steering wheel is turned completely to either left or right, a mad squeaking starts (the car has to be moving) but speed doesn't matter. The sound comes from front, both sides, or might also be from engine bay.

2. A pretty loud constant clunking from the rear, which seems to vary depending on speed. The faster I go, the faster it clunks. The clunking can be felt very good also at the front passenger's footwell.
Someone suggested wheel bearings, but I doubt that, I also heard about springs which I also doubt since the clunking is constant, no matter the road or speed.

I had a similar problem with my previous BMW E46 (though random and much louder); it turned out to be the output shafts.

3. The car kind of jumps when engine breaking and gently pressing the gas pedal, this is something that many cars do, but not this bad, it's almost as if the car is stalling. Same thing happens when engine breaking and shifting down, it seems to happen at about rev. 2000x/min or under just before the need to down shift. It feels more like an kangaroo ride than a French ride.
I know this starts to happen to "older and used" cars, but is there a way to fix it or make it better on a citroen.

Question: If Lexia 3 V48 PP2000 V25 XS Evolution Citroen/Peugeot Diagnostic Support Peugeot 307 with Diagbox V7.57 can edit car settings?

I'm planning on getting Lexia-3 Lexia 3 V48 xs Evolution Citroen/Peugeot Diagnostic PP2000 V25, but before I do, is it possible to edit car settings with Lexia? For example auto. door locking at certain speed, maybe light functions or something?

Engineer suggestion:

Chinese Lexia 3 is only used to diagnose, but it is option to reset/program, the user is supposed to do it online, try to get one account from original factory and connect to their server, then use their data to do.

The next thing is to get one account from original factory and connect to their server. Good luck for you.

Help from the other friends:
Auto door locking is already enabled at circa 11 mph and can be turned on or off via driver settings in the car without Lexia. And another one suggested Auto door locking is enabled/disabled by pressing the internal door lock button on the dash by more than a few seconds. (probably 5 secs to be sure).

Their suggest narrowed it down for me very much! After I trial from the driver settings I couldn't get it to work, I found the auto-lock option where it says it’s disabled. If I press OK-button on the steering wheel, it just jumps to the main screen and nothing happens.

Diagbox V7.57 software display: