Lexia 3 is the universal diagnostic
interface for PSA Citroen and Peugeot. Here is a step-by-step Peugeot 307 new
key programming instruction using lexia 3 XS-evolution PP2000 diagbox
interface.
Equipment:
A laptop running Win XP/Win 7 mode
Pin code
NOTE:
PIN Code is required during key programming procedure.
Record your vehicle PIN code first. Free download Renault Pin code reader
software:
Instruction:
1.
Install and activate Lexia 3 PP2000 V25 diagnostic software
2.
Select vehicle model 307 and wait until the well communication built
3.
Check the entering vehicle information
4.
Select the application as Peugeot Plant 2000 and confirm it
5.
Select test by ECU
6.
Select Built-in systems interface
7.
The system is reading the ECU in progress, follow and accept the windows
prompts.
8.
Select Learning option under Carry out the tests menu display
9. Select Programming of keys
10. The system will display key programming procedure
when activation process is complete. Confirm to continue.
11. Confirm Unlocking the E.C.U program
12. Manually enter the Confidential code
(PIN Code)
13. The system is verifying the PIN code. If the code is correct, the
built-in systems interface is ready for programming of keys.
14. Enter the key number to be learnt. The
number of keys to be programmed cannot exceed 5.
15. Follow the screen prompt to switch off
the ignition
16. Then switch ignition to ON within 15 s.
17. Key programmed, switch off the ignition
and take out the key
18. Switch ignition ON again and insert the
next key in the ignition. Repeat the key programming procedure to program
another key. When complete programming, the system will display keys that are
programmed.
19. Follow the screen instructions. Check the
handbrake is on. For an automatic gearbox, check the gear level is in position “P”.
For a manual gearbox, check that the gear level is in neutral
20. Follow the re-synchronies the HF remote
controls procedure to operate until the “End of key programming procedure”
notice displays. Exit the program.
This is from obd tool website
technical support:
没有评论:
发表评论